Free ATS Resume Checker for Embedded Systems Engineers
Recruiters hiring embedded engineers usually shortlist on Embedded C, the microcontrollers and protocols you have worked with, and RTOS or Embedded Linux experience - then look for proof that your firmware ran on real hardware. Upload your resume to see how it reads, which embedded skills it shows, and what to improve before you apply.
By uploading, you agree to our Terms and Privacy Policy. Your CV is saved to a RoleMapr profile under the email in it, and that profile is visible to recruiters - even before you create an account.
Skills recruiters look for in Embedded Systems Engineer resumes
These are the skills RoleMapr looks for when it reads a Embedded Systems Engineer resume. Include the ones you have actually used - and show where you used them, not just in a skills list.
- C
- C++
- Debugging
- Schematic Reading
- Embedded Systems
- Embedded C
- Embedded Linux
- RTOS
- FreeRTOS
- Firmware
- Device Drivers
- Bare-Metal Programming
- Microcontroller
- ARM Cortex
- STM32
- I2C
- SPI Protocol
- UART
- CAN Protocol
- AUTOSAR
- Zephyr RTOS
- ThreadX
- VxWorks
- RISC-V
- ESP32
- PIC Microcontrollers
- MISRA C
- JTAG
- LIN Bus
- CAN FD
- Yocto Project
- Buildroot
- U-Boot
- Device Tree
- HIL Testing
- SIL Testing
What to highlight at your experience level
Fresher / 0-2 years
Lead with C and the boards you have actually programmed - STM32, ESP32, Arduino or PIC - and the protocols you used, such as UART, I2C and SPI. Final-year projects count if you say what you built, what hardware it ran on and what it did.
2-5 years
Show drivers, firmware modules or BSP work you owned, the debugging you did with JTAG, oscilloscopes or logic analysers, and the products or domains involved - automotive, consumer, industrial or medical.
5+ years
Show system-level ownership - architecture choices, RTOS or Linux platform decisions, safety standards such as ISO 26262 or MISRA compliance, bring-up of new hardware, and engineers you led.
Common Embedded Systems Engineer resume mistakes
- Writing "Embedded Systems" as a skill without naming the microcontroller, RTOS or protocols. Recruiters search for the specific names.
- Not stating the domain. Automotive, IoT, consumer electronics and industrial roles look for different standards and tools.
- Describing college projects with no hardware detail - say which board, which sensors and which interfaces you used.
- Pasting block diagrams or circuit images into the resume. ATS software ignores images, so describe the design in text.
- Leaving out testing and debugging. HIL, unit tests and hardware debugging are a big part of the job.
Weak vs strong resume bullet points
The strong versions say what you did, with which tool, and what changed because of it.
Weak: Worked on firmware development.
Strong: Developed Embedded C firmware on an STM32 for a smart energy meter, including UART and SPI drivers and a FreeRTOS task for metering, shipped on around 50,000 units.
Weak: Did debugging of hardware issues.
Strong: Traced intermittent I2C sensor failures with a logic analyser to a timing issue, fixed the driver and added a bus-recovery routine, which ended field returns for that fault.
Weak: Worked on AUTOSAR.
Strong: Configured AUTOSAR communication stack modules for CAN on a body control ECU and wrote MISRA C compliant application code that passed static analysis and HIL testing.
Find Embedded Systems Engineer jobs that match your resume
RoleMapr collects jobs from company career pages and recruiters, ranks them by how well they match your resume, and shows which skills you are missing.
Create a free accountFrequently asked questions
What projects should an embedded fresher put on a resume?
Projects that run on real hardware work best - for example, a sensor node on an ESP32 or STM32 that talks over I2C or SPI and sends data using UART or Wi-Fi. Mention the microcontroller, the peripherals and any RTOS you used. A GitHub link with code and a short demo video helps.
Should an embedded resume mention electronics and hardware skills?
Yes, briefly. Reading schematics and datasheets, using an oscilloscope or logic analyser, and board bring-up are valued in many embedded roles. Keep the focus on firmware and software unless the role is hardware-heavy.
Is this resume checker free?
Yes. You can upload your resume and see the results without creating an account. If you sign up later with the same email, the full report and your job matches are saved to your profile.
What does the checker look at?
It reads your resume the way an ATS and a recruiter would: the role it fits, your experience level, the skills it finds, and how clearly your work and results come across. You get strengths and areas to improve.
What happens to my resume after I upload it?
It is saved to a RoleMapr profile under the email in your resume, and that profile is visible to recruiters looking for candidates. We email that address a link to remove it at any time. See our Privacy Policy for details.